316 stainless steel tapped base pillow block bearing

These pillow block bearings can be secured vertically or horizontally to support rotating shafts. In comparison to the EXS washdown pillow block bearing, this design is more compact and therefore more suitable in tight spaces.

The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to clean.

The units are delivered complete with a spherical roller bearing insert that enables the bearing block to carry up to five times more load than conventional bearings. Spherical roller bearings have the advantage that they provide a much larger load capacity than ball bearings and can accommodate axial force.

Many sealing options are possible. Each possesses different properties depending on the application. We would be pleased to advise you on the best choice of seal.

The compact EXC bearing unit fits into tight spaces.

TypdBCT1HH1DJLEMGrease holeBasic load ratring
KN for spherical roller bearing
Basic load ratring
KN for double roll ball bearing
Axial movementSeal seat
MetricImperialDynamicStaticDynamicStatic
EXC-02423,8115/1626344472.836.52550.8702910M6596215,74,73,542×7
EXC-0252562/63
EXC-02625,41
EXC-02828,571 1/826354884.8432676983310M68188165,23,547×7
EXC-030301 2/11
EXC-A3030,161 3/16
EXC-03231,751 1/428385094.14828831033310M688100196,53,552×7
EXC-A3534,91 3/8
EXC-035351 17/45
EXC-03736,511 7/16283951984928891163412M695105227,53,562×7
EXC-03838,11 1/2
EXC-040401 23/40
EXC-04342,861 11/16324457106.85432951203712M610012022,98,1462×7
EXC-04444,451 3/4
EXC-045451 3/4
EXC-04949,21 15/16344760114.257.2351021353816M6120140259,6472×7
EXC-050501 31/32
EXC-05150,82

 

TypdBCT1HH1DJLEMGrease holeBasic load ratring
KN for spherical roller bearing
Basic load ratring
KN for double roll ball bearing
Axial movementSeal seat
MetricImperialDynamicStaticDynamicStatic
EXCR-02423,8115/1625344472,836,52556702910M6596215,74,73,542×7
EXCR-0252562/63
EXCR-A2525,41
EXCR-02828,571 1/826354884,742,92666983310M68188165,23,547×7
EXCR-030301 2/11
EXCR-A3030,161 3/16
EXCR-03231,751 1/428385093,747,628801033310M688100196,53,552×7
EXCR-A3534,91 3/8
EXCR-035351 17/45
EXCR-03736,511 7/162839519849,228841163412M695105227,53,562×7
EXCR-03838,11 1/2
EXCR-040401 23/40
EXCR-04342,861 11/1632445710754,232901203712M610012022,98,1462×7
EXCR-04444,451 3/4
EXCR-045451 3/4
EXC-04949,21 15/16344760114,257,235941353816M6120140259,6472×7
EXCR-050501 31/32
EXCR-05150,82

 

Footnotes: T¹ The dimension T gets a maximum 6 millimeters wider when the bearing unit is assembled with centrifugal seals

Load directions for Extreme Bearings

Extreme Bearing units are intended for loads acting vertically towards the base plate support. Therefore, if the bearing housing is supported over its entire base, loads are limited only by the load limits of the bearing insert. If loads acting in other directions occur or if the housing is not supported over its entire base area, check that the magnitude of the load is permissible for the bolt assembly attached to the machine frame.

Type EXC Tapered pillow block bearings