The new generation single roller Extreme Bearing!

Extreme Bearing realized improving the bearing unit performance for industries where you find

 abrasive dust , corrosive, high-pressure or wash-down applications.

Resulting in the new Extreme Bearing assembly providing exceptional results in excluding contaminants:

 

Longer bearing lifetime!

 Lower maintenance !

Improved productivity!

Easier mounting!

Superior triple sealing SS 316 bearing unit

Superior performance in harsh environments!

Bearing housing seals

Grease-filled housing

Bearing shields

Many Primary barrier sealing configurations are possible. Each possesses different properties depending on the application. We would be pleased to advise you to the best choice of seal.

Type-E bearing shields

Type-E bearing seals provide an extra barrier to prevent contamination from entering the bearing!

Type-E bearings feature high radial load capability in combination of 2-rs bearing shields and misalignment capabilities, differentiating type-E bearings bearings from the unsealed 2-row spherical roller bearings.

Standard are these Type-E bearings lubricant, and seal integrated into one system, called  “Sealed and greased for life”

The grease nipple on the bearing housing is intended to fill the Extreme Bearing housing with grease so that a grease packing is created, preventing water from entering. The Type-E bearing seals provide an extra barrier to prevent contamination from entering the bearing!

  • Extra barrier to prevent contamination
  • The bearing seals are properly secured by retaining rings.
  • high radial load capability.
  • Sealed and greased for life
  • Easyier mounting

Combination Load Capacity

Type-E bearings provide an anti friction solution when supporting rotating shafts with combination radial and thrust loads.

The Type-E bearing design allows for high radial load capacity and the ability to accommodate a thrust load in combination with a radial load. Thrust load capability is proportional to the amount of radial load and pure thrust loads are not recommended. Typically a ratio less than .20 of axial to radial loads (Fa/Fr < .20) is appropriate for Type-E bearings, equivalent load

Single row, Type-E roller bearings

Dimensions
Basic Load Rating Limiting speed
Dynamic Static Grease
Bearing No. d1 D B rsmin B1 d2 B2 B0 Kn rpm
400105 K-CW33 + H205 20 52 18 1,0 26 38 8 3,7 40 40 6000
400106 K-CW33 + H206 25 62 20 1,0 28 45 8 3,7 50 55 5600
400107 K-CW33 + H207 30 72 23 1,1 32 52 9 3,7 68 78 5300
400108 K-CW33 + H208 35 80 23 1,1 33 58 10 5,5 77 88 5000
400109 K-CW33 + H209 40 85 23 1,1 34 65 11 5,5 80 95 4500
400110 K-CW33 + H210 45 90 23 1,1 35 70 12 5,5 83 102 4300
400111 K-CW33 + H211 50 100 25 1,5 37 75 12 5,5 102 125 3500
400112 K-CW33 + H212 55 110 28 1,5 41 80 13 5,5 100 120 3000
400113 K-CW33 + H213 60 120 31 1,5 45 85 14 5,5 150 190 2000
400115 K-CW33 + H215 65 130 31 1,5 46 98 15 5,5 160 200 1400
400116 K-CW33 + H216 70 140 33 2,0 50 105 17 5,5 170 220 1450
400117 K-CW33 + H217 75 150 36 2,0 54 110 18 8,3 250 325 1500
400118 K-CW33 + H218 80 160 40 2,0 58 120 18 8,8 210 7270 1600
400120 K-CW33 + H220 90 180 46 2,1 66 130 20 8,3 310 420 1300
400122 K-CW33 + H222 100 200 53 2,1 74 130 21 8,3 410 570 1000