EXC compact pillow block bearing units

316 stainless steel tapped base pillow block bearing

These pillow block bearings can be secured vertically or horizontally to support rotating shafts. In comparison to the EXS washdown pillow block bearing, this design is more compact and therefore more suitable in tight spaces.

The housing is made of stainless steel (grade 316) which is rustproof and resistant to corrosion from seawater. It is also resistant to all cleaning products and chemicals. The rounded corners and smooth surfaces make these units very easy to clean.

The units are delivered complete with a spherical roller bearing insert that enables the bearing block to carry up to five times more load than conventional bearings. Spherical roller bearings have the advantage that they provide a much larger load capacity than ball bearings and can accommodate axial force.

Many sealing options are possible. Each possesses different properties depending on the application. We would be pleased to advise you on the best choice of seal.

The compact EXC bearing unit fits into tight spaces.

Typ d B C T1 H H1 D J L E M Grease hole Basic load ratring
KN for spherical roller bearing
Basic load ratring
KN for double roll ball bearing
Axial movement Seal seat
Metric Imperial Dynamic Static Dynamic Static
EXC-024 23,81 15/16 26 34 44 72.8 36.5 25 50.8 70 29 10 M6 59 62 15,7 4,7 3,5 42×7
EXC-025 25 62/63
EXC-026 25,4 1
EXC-028 28,57 1 1/8 26 35 48 84.8 43 26 76 98 33 10 M6 81 88 16 5,2 3,5 47×7
EXC-030 30 1 2/11
EXC-A30 30,16 1 3/16
EXC-032 31,75 1 1/4 28 38 50 94.1 48 28 83 103 33 10 M6 88 100 19 6,5 3,5 52×7
EXC-A35 34,9 1 3/8
EXC-035 35 1 17/45
EXC-037 36,51 1 7/16 28 39 51 98 49 28 89 116 34 12 M6 95 105 22 7,5 3,5 62×7
EXC-038 38,1 1 1/2
EXC-040 40 1 23/40
EXC-043 42,86 1 11/16 32 44 57 106.8 54 32 95 120 37 12 M6 100 120 22,9 8,1 4 62×7
EXC-044 44,45 1 3/4
EXC-045 45 1 3/4
EXC-049 49,2 1 15/16 34 47 60 114.2 57.2 35 102 135 38 16 M6 120 140 25 9,6 4 72×7
EXC-050 50 1 31/32
EXC-051 50,8 2
Typ d B C T1 H H1 D J L E M Grease hole Basic load ratring
KN for spherical roller bearing
Basic load ratring
KN for double roll ball bearing
Axial movement Seal seat
Metric Imperial Dynamic Static Dynamic Static
EXCR-024 23,81 15/16 25 34 44 72,8 36,5 25 56 70 29 10 M6 59 62 15,7 4,7 3,5 42×7
EXCR-025 25 62/63
EXCR-A25 25,4 1
EXCR-028 28,57 1 1/8 26 35 48 84,7 42,9 26 66 98 33 10 M6 81 88 16 5,2 3,5 47×7
EXCR-030 30 1 2/11
EXCR-A30 30,16 1 3/16
EXCR-032 31,75 1 1/4 28 38 50 93,7 47,6 28 80 103 33 10 M6 88 100 19 6,5 3,5 52×7
EXCR-A35 34,9 1 3/8
EXCR-035 35 1 17/45
EXCR-037 36,51 1 7/16 28 39 51 98 49,2 28 84 116 34 12 M6 95 105 22 7,5 3,5 62×7
EXCR-038 38,1 1 1/2
EXCR-040 40 1 23/40
EXCR-043 42,86 1 11/16 32 44 57 107 54,2 32 90 120 37 12 M6 100 120 22,9 8,1 4 62×7
EXCR-044 44,45 1 3/4
EXCR-045 45 1 3/4
EXC-049 49,2 1 15/16 34 47 60 114,2 57,2 35 94 135 38 16 M6 120 140 25 9,6 4 72×7
EXCR-050 50 1 31/32
EXCR-051 50,8 2
Footnotes: T¹ The dimension T gets a maximum 6 millimetres wider when the bearing unit is assembled with centrifugal seals.

Load directions for Extreme Bearings

Extreme Bearing units are intended for loads acting vertically towards the base plate support. Therefore, if the bearing housing is supported over its entire base, loads are limited only by the load limits of the bearing insert. If loads acting in other directions occur or if the housing is not supported over its entire base area, check that the magnitude of the load is permissible for the bolt assembly attached to the machine frame.

Type EXC Tapered pillow block bearings